BS BB30L-B (DC) Combi-Pack Dry Battery - Image 1

BS BB30L-B (DC) Combi-Pack Dry Battery

  • 12v
  • 130mm
  • 165mm
  • 176mm
  • 300
  • 31.6
  • Batteries
  • BS-Batteries
  • Dry
  • Electrical
  • Electrical>Batteries>BS-Batteries
  • minus/plus
  • Tier1-Electrical
  • Tier2-Batteries
  • Tier3-BS-Batteries
£145.81
BS BatteryBatteries
BB30L-B Battery (Dry range). This 12V 31.6Ah battery is a lead-acid flooded battery that must be filled before the first use, resulting in a much longer shelf life.
For box quantities please add multiples of 2.

Professional installation recommended. Please ensure it is fitted by a qualified technician.

  • DRY-charged technology
  • for initial filling
  • Refilled with water if necessary
  • No need to be recharged while stocked (if not activated)

BS Battery

With more than 400 battery types covering a wide range of powersport applications, its 6 subsidiaries around the world and its 5 production bases, BS BATTERY has become within a few years, one of the largest and most innovative powersport battery manufacturers, present in both OEM and OES fields.Today, distributed in more than 80 countries, BS BATTERY is a reliable partner of the major distribution players and vehicle manufacturers.


Position: This battery should never be fitted on its side. It is only suitable for vertical fitment. Use a factory sealed or lithium type for batteries that sit at angles. Initial charging:Most problems with batteries today are due to improper initial activation. Newly activated batteries should always be charged before you install them into any motorcycle, otherwise they will lose at least 20% of their capacity. This will definitely result in a much shorter service life or other battery problems. Fill the battery to the indicated level or until the MF combi pack is empty. Charge the battery for three to five hours at the current equivalent of 1/10 of its rated capacity to get a full charge.
Failure caused by incorrect activation or charging is not a warranty issue. Further research shows that 95% of alleged problems occurring with batteries that have been in service for more than a couple of months and have been left standing without charge are caused by sulfation. This is a condition where a crystal like material forms on the lead plates. When this chemical reaction happens, it is impossible to restore a full charge and the battery has to be replaced. This is NOT caused by a faulty battery, it is a fault with maintenance. Please ensure batteries are kept charged on a suitable charger when not in use.Note all measurements given are nominal and may vary by 1mm or so. For an exact measurement, please contact our sales officeSpecially designed to offer good performance and reliability, this conventional battery is delivered with an acid pack, and must be activated before first use and has to be checked and maintained periodically. It must not be fitted at any angle other than vertical
Barcode: 3661453105529
Length: 165mm
Width: 130mm
Height: 176mm
CCA: 300
Capacity: 31.6
Polarity: minus/plus
Type: Dry
Voltage: 12v

Fitment Summary
Compatible with 7 models (yearly).

  • Polaris: Ranger 700EFI, Ranger 700XP

Price Promise

We guarantee competitive pricing across our full range of new and used bikes.

Certified Dealer

Officially authorised and trusted to supply and support leading motorcycle brands.

Extended Warranty

Added peace of mind with comprehensive warranty options available.

4.8 Google Rating

Highly rated by our customers for service, expertise, and reliability.

You Might Also Like

Discover more products from our collection

BS BB3L-B (DC) Combi-Pack Dry Battery

BS BB3L-B (DC) Combi-Pack Dry Battery

BB3L-B Battery (Dry range). This 12V 3.2Ah battery is a lead-acid flooded battery that must be filled before the first use, resulting in a much longer shelf life.For box quantities please add multiples of 6.Professional installation recommended. Please ensure it is fitted by a qualified technician. DRY-charged technology for initial filling Refilled with water if necessary No need to be recharged while stocked (if not activated) BS BatteryWith more than 400 battery types covering a wide range of powersport applications, its 6 subsidiaries around the world and its 5 production bases, BS BATTERY has become within a few years, one of the largest and most innovative powersport battery manufacturers, present in both OEM and OES fields.Today, distributed in more than 80 countries, BS BATTERY is a reliable partner of the major distribution players and vehicle manufacturers.Position: This battery should never be fitted on its side. It is only suitable for vertical fitment. Use a factory sealed or lithium type for batteries that sit at angles. Initial charging:Most problems with batteries today are due to improper initial activation. Newly activated batteries should always be charged before you install them into any motorcycle, otherwise they will lose at least 20% of their capacity. This will definitely result in a much shorter service life or other battery problems. Fill the battery to the indicated level or until the MF combi pack is empty. Charge the battery for three to five hours at the current equivalent of 1/10 of its rated capacity to get a full charge.Failure caused by incorrect activation or charging is not a warranty issue. Further research shows that 95% of alleged problems occurring with batteries that have been in service for more than a couple of months and have been left standing without charge are caused by sulfation. This is a condition where a crystal like material forms on the lead plates. When this chemical reaction happens, it is impossible to restore a full charge and the battery has to be replaced. This is NOT caused by a faulty battery, it is a fault with maintenance. Please ensure batteries are kept charged on a suitable charger when not in use.Note all measurements given are nominal and may vary by 1mm or so. For an exact measurement, please contact our sales officeSpecially designed to offer good performance and reliability, this conventional battery is delivered with an acid pack, and must be activated before first use and has to be checked and maintained periodically. It must not be fitted at any angle other than verticalBarcode: 3661453105888 Length: 98mm Width: 56mm Height: 110mm CCA: 30 Capacity: 3.2 Polarity: minus/plus Type: Dry Voltage: 12v Fitment SummaryCompatible with 72 models (yearly). BSA: Rambler 125, Rambler 175, Tracker 125 Kawasaki: KDX 220R, KH 125K6, KH 125K7, KH 125K8, KH 125K9 Yamaha: DT 125 LC2 YPVS, DT 2002LR, DT 200R, DT 200WR, IT 200L, XT 250T, XT 350A, XT 350B, XT 350C, XT 350D, XT 350E, XT 350F, XT 350G, XT 350H, XT 350J, XT 350K, XT 350L, XT 350M, XT 350U, XT 350V, XT 350W, XT 350X, XT 350Y

BatteriesBS Battery
£20.33

In stock

BS BIX30L-BS (CP) Combi-Pack MF Battery

BS BIX30L-BS (CP) Combi-Pack MF Battery

BIX30L-BS Battery (Dry range). This 12V 31.6Ah battery is a lead-acid flooded battery that must be filled before the first use, resulting in a much longer shelf life.Professional installation recommended. Please ensure it is fitted by a qualified technician. DRY-charged technology for initial filling Refilled with water if necessary No need to be recharged while stocked (if not activated) BS BatteryWith more than 400 battery types covering a wide range of powersport applications, its 6 subsidiaries around the world and its 5 production bases, BS BATTERY has become within a few years, one of the largest and most innovative powersport battery manufacturers, present in both OEM and OES fields.Today, distributed in more than 80 countries, BS BATTERY is a reliable partner of the major distribution players and vehicle manufacturers.Position: This battery should never be fitted on its side. It is only suitable for vertical fitment. Use a factory sealed or lithium type for batteries that sit at angles. Initial charging:Most problems with batteries today are due to improper initial activation. Newly activated batteries should always be charged before you install them into any motorcycle, otherwise they will lose at least 20% of their capacity. This will definitely result in a much shorter service life or other battery problems. Fill the battery to the indicated level or until the MF combi pack is empty. Charge the battery for three to five hours at the current equivalent of 1/10 of its rated capacity to get a full charge.Failure caused by incorrect activation or charging is not a warranty issue. Further research shows that 95% of alleged problems occurring with batteries that have been in service for more than a couple of months and have been left standing without charge are caused by sulfation. This is a condition where a crystal like material forms on the lead plates. When this chemical reaction happens, it is impossible to restore a full charge and the battery has to be replaced. This is NOT caused by a faulty battery, it is a fault with maintenance. Please ensure batteries are kept charged on a suitable charger when not in use.Note all measurements given are nominal and may vary by 1mm or so. For an exact measurement, please contact our sales officeSpecially designed to offer good performance and reliability, this conventional battery is delivered with an acid pack, and must be activated before first use and has to be checked and maintained periodically. It must not be fitted at any angle other than verticalBarcode: 3564093007539 Length: 166mm Width: 126mm Height: 173mm CCA: 400 Capacity: 31.6 Polarity: minus/plus Type: Dry Voltage: 12v Fitment SummaryCompatible with 515 models (yearly). Arctic Cat: HDX 700 Prowler, M4 700 4x4 Auto, Prowler 812 Side by Side, S 700, TRV 700 4x4 Utility, Wild Cat 7004x4, Wild Cat 700X, Wild Cat 750, Wildcat 1000 Side by Side, XT 550 Prowler, XTX 700, XTZ 1000 Prowler, XTZ 1000 R Prowler, XTZ 1000TRV BMW: R 1800, R 1800B, R 1800 Classic, R 1800 Transcontinental, R 1800` Can Am: Defender 1000 DPS HD10, Defender 1000 DPS HD5, Defender 1000HD5, Defender 1000 MAX XT HD10, Defender 1000 MAX XT HD8, Defender 1000 Mossy Oak Hunting Edition, Defender 1000 XT Cab HD10, Defender 1000 XT Cab HD8, Defender 1000 XT HD10, Defender 1000 XT HD8 CFMOTO: CForce 800 Overland, UForce 1000 Side by Side, UForce 600 Side by Side, UForce 800 Side by Side, UForce 800 UU-A, ZForce 1000 Side by Side, ZForce 800 EX/Trail Side by Side, ZForce 800Z8, ZForce 950 Side by Side Harley-Davidson: FLHR 1340 Road King (EG), FLHR 1450 Road King (EG), FLHR 1690 Road King (EG), FLHR 1750 Road King (EG), FLHRC 1584 Road King (EG), FLHRC 1690 Road King (EG), FLHRCi 1450 Road King (EG), FLHRi 1450 Road King (EG), FLHRi 1584 Road King (EG), FLHRS 1450 Road King (EG), FLHRS 1584 Road King (EG), FLHRXS 1750 Road King (EG), FLHT 1340 Electra Glide Standard, FLHT 1450 Electra Glide Standard, FLHT 1750 Electra Glide Standard, FLHTC 1340 Electra Glide Classic, FLHTC 1690 Electra Glide Classic, FLHTCi 1584 Electra Glide Classic, FLHTCU 1340 Electra Glide Ultra Classic, FLHTCU 1584 Electra Glide Ultra Classic, FLHTCU 1690 Electra Glide Ultra Classic, FLHTCU 1750 Electra Glide Ultra Classic, FLHTCUi 1450 Electra Glide Ultra Classic, FLHTCUL 1690 Electra Glide Ultra Classic, FLHTCUSE 1584 Electra Glide Ultra Classic, FLHTCUSE8 1690 Electra Glide Ultra Classic, FLHTCUTG 1690 Tri Glide, FLHTCUTG 1750 Tri Glide Ultra, FLHTCUTG 1868 Tri Glide Ultra, FLHTi 1584 Electra Glide, FLHTK 1584 Ultra Ltd, FLHTK 1690 Electra Glide Ultra, FLHTK 1690 Electra Glide Ultra, FLHTK 1750 Ultra ltd, FLHTKL 1584 Ultra Ltd, FLHTKL 1690 Electra Glide Ultra, FLHTKL 1750 Ultra ltd Low, FLHTUS 1690 Electra Glide Ultra, FLHX 1690 Street Glide, FLHX 1750 Street Glide, FLHXi 1584 Street Glide, FLHXS 1690 Street Glide, FLHXS 1750 Street Glide, FLRT 1690 Freewheeler, FLRT 1750 Freewheeler, FLRT 1868 Freewheeler, FLSTC 1868 Heritage Softail Classic, FLTCUi 1340 Tour Glide injection, FLTR 1340 Road Glide, FLTR 1450 Road Glide, FLTRi 1450 Road Glide, FLTRi 1584 Road Glide, FLTRK 1750 Road Glide, FLTRU 1690 Road Glide, FLTRU 1750 Road Glide, FLTRX 1690 Road Glide, FLTRX 1750 Road Glide, FLTRXS 1690 Road Glide, FLTRXS 1750 Road Glide Moto Guzzi: California 1100 Vintage 90 Anniversario Piaggio: Ape 220, Ape 220 P501 P601 P601V, Ape 220 P703-P703V FL2 Polaris: Ace 900 Efi EPS, Ace 900 SP EPS, Ranger 1000EPS, Ranger 1000 XP EPS, Ranger 900XP, Ranger 925 XP4 Turbo, RZR 1000S, RZR 1000XP, RZR 1000XP4, RZR 800 4 EPS, RZR 800EPS, RZR 800 EPS Blue Fire, RZR 900 HP X0, RZR 900 Ranger, RZR 900XP, RZR 900 XP EPS, RZR 900XP4, RZR 900 XP4 EPS, RZR 925 Pro R, RZR 925 Pro XP, RZR 925 XP Turbo, Scrambler 1000 XP S EPS, Scrambler 850, Scrambler 85048, Scrambler 850SP, Sportsman 600 Twin, Sportsman 700EFI, Sportsman 700MV, Sportsman 700X2 Suzuki: RE5 500 Rotary

BatteriesBS Battery
£152.24

In stock

BS BB9L-B (12N9-3B) (DC) Combi-Pack Dry Battery

BS BB9L-B (12N9-3B) (DC) Combi-Pack Dry Battery

BB9L-B Battery (Dry range). This 12V 9.5Ah battery is a lead-acid flooded battery that must be filled before the first use, resulting in a much longer shelf life.For box quantities please add multiples of 4.Professional installation recommended. Please ensure it is fitted by a qualified technician. DRY-charged technology for initial filling Refilled with water if necessary No need to be recharged while stocked (if not activated) BS BatteryWith more than 400 battery types covering a wide range of powersport applications, its 6 subsidiaries around the world and its 5 production bases, BS BATTERY has become within a few years, one of the largest and most innovative powersport battery manufacturers, present in both OEM and OES fields.Today, distributed in more than 80 countries, BS BATTERY is a reliable partner of the major distribution players and vehicle manufacturers.Position: This battery should never be fitted on its side. It is only suitable for vertical fitment. Use a factory sealed or lithium type for batteries that sit at angles. Initial charging:Most problems with batteries today are due to improper initial activation. Newly activated batteries should always be charged before you install them into any motorcycle, otherwise they will lose at least 20% of their capacity. This will definitely result in a much shorter service life or other battery problems. Fill the battery to the indicated level or until the MF combi pack is empty. Charge the battery for three to five hours at the current equivalent of 1/10 of its rated capacity to get a full charge.Failure caused by incorrect activation or charging is not a warranty issue. Further research shows that 95% of alleged problems occurring with batteries that have been in service for more than a couple of months and have been left standing without charge are caused by sulfation. This is a condition where a crystal like material forms on the lead plates. When this chemical reaction happens, it is impossible to restore a full charge and the battery has to be replaced. This is NOT caused by a faulty battery, it is a fault with maintenance. Please ensure batteries are kept charged on a suitable charger when not in use.Note all measurements given are nominal and may vary by 1mm or so. For an exact measurement, please contact our sales officeSpecially designed to offer good performance and reliability, this conventional battery is delivered with an acid pack, and must be activated before first use and has to be checked and maintained periodically. It must not be fitted at any angle other than verticalBarcode: 3661453105994 Length: 135mm Width: 75mm Height: 139mm CCA: 115 Capacity: 9.5 Polarity: minus/plus Type: Dry Voltage: 12v Fitment SummaryCompatible with 95 models (yearly). Benelli: 125 Jarno Honda: VFR400 R Kawasaki: ER 250 B Z250GP Z250T, H1 500D, H1 500E, H1 500F, KH 500A8 MZ: Baghira 660 Forest, ETZ 125, ETZ 125 Roadstar, ETZ 125 Sportstar, ETZ 150, ETZ 250, Mastiff 660, Skorpion 660 Cup Sport, Skorpion 660 Replica, SM 660 Street Moto, Trouper 660 Sinnis: Terrain 125 ZS125-86

BatteriesBS Battery
£46.94

In stock

BS BTZ7V SLA (WC) Factory Activated Battery

BS BTZ7V SLA (WC) Factory Activated Battery

BTZ7V Battery (SLA AGM range). This 12V 11.8Ah battery is ready-to-use due to being factory activated, completely spill-proof, and requires no maintenance.For box quantities please add multiples of 8.Professional installation recommended. Please ensure it is fitted by a qualified technician. Just plug and play AGM (Absorbent Glass mat) technology VRLA (Valve Regulated Lead Acid) design Factory sealed and electrolyte held in a glass fiber mat Very safe Factory activated and sealed means a battery that is perfect for people who have better things to do than battery maintenance! The permanently sealed battery never needs refilling, however, it still needs periodic charging. Ideal for motorcycles, scooters, ATVs, riding mowers and personal watercraft.Features: Spill-proof design means virtually no possibility of leaks Advanced lead-calcium technology pumps up starting power Sulfation retardant dramatically reduces battery-killing plate sulfation Long lasting which means Maintenance Free batteries from will last up to three times longer than conventional batteries Exceptional resistance to vibration makes Yuasa the most reliable battery on the market today Position: Safe to mount at angles up to 90 degrees. Initial charging: Most problems with batteries today are due to improper initial activation. Newly activated batteries should always be charged before you install them into any motorcycle, otherwise they will lose at least 20% of their capacity. This will definitely result in a much shorter service life or other battery problems. Fill the battery to the indicated level or until the MF combi pack is empty. Charge the battery for three to five hours at the current equivalent of 1/10 of its rated capacity to get a full charge.Failure caused by incorrect activation or charging is not a warranty issue. Further research by GS-Yuasa shows that 95% of alleged problems occurring with batteries that have been in service for more than a couple of months and have been left standing without charge are caused by sulfation. This is a condition where a crystal like material forms on the lead plates. When this chemical reaction happens, it is impossible to restore a full charge and the battery has to be replaced. This is NOT caused by a faulty battery, it is a fault with maintenance. Please ensure batteries are kept charged on a suitable charger when not in use.Note all measurements given are nominal and may vary by 1mm or so. For an exact measurement, please contact our sales officeManufacturer Part No. (MPN): BS-BTZ7V SLABarcode: 3564093009120 Length: 150mm Width: 88mm Height: 110mm CCA: 230 Capacity: 11.8 Polarity: plus/minus Type: SLA AGM Voltage: 12v Fitment SummaryCompatible with 33 models (yearly). Yamaha: GPD 150 Nmax, GPD125A 125 N-Max, HW 125 Xenter, LCG 125 RayZR, LT/S 125C, MWS 125 C Tricity SEC2, MWS 125 Tricity, R 125, Xmax 125 Tech Max, Xmax 125 Tech Max+, YP 125 X Max

BatteriesBS Battery
£54.19

In stock

What Our Customers Say

4.8 rating from our customers

About John Lee Motorcycles

John started work in the Motorcycle Trade in 1955, working for 2 large London Dealers for 10 years. His ambition was to own his own dealership, so moved to Northamptonshire and purchased the shop where we are today in Higham Ferrers, that was 1964.

Join the Club

Sign up for exclusive offers and discounts on the latest Motocross, Enduro and Electric bikes.

John Lee and Sons Motorcycles 2026. All rights reserved.
Powered By Fastrak