Noco GC001 Battery Clamp Connector - Image 1

Noco GC001 Battery Clamp Connector

  • Battery-chargers-and-accessories
  • Battery-Chargers-and-Powerbanks
  • Cycle
  • Electrical
  • Electrical>Battery-Chargers-and-Powerbanks>Battery-chargers-and-accessories
  • Tier1-Electrical
  • Tier2-Battery-Chargers-and-Powerbanks
  • Tier3-Battery-chargers-and-accessories
£19.96
NOCOBattery Chargers
Noco GC001 Battery Clamp Connector

X-Connect Battery Clamps
X-Connect Micro Battery Clamps with M6 Eyelets allows a battery charger to connect quickly to any battery. Replace a lost connector or add a set to a convenient location for easy charging. Remove the eyelets from the clamps to mount the connectors to the battery for a quick plug-in access point.
DUAL PURPOSE BATTERY CLAMPS.
MADE FOR GENIUS.
The GC001 battery clamps are compatible with the X-Connect on Genius Chargers. Attach to the battery with the micro clamps for temporary connections or permanently mount the eyelets to the battery to quickly plug in your Genius battery charger for daily charging and battery maintenance.
precise grip. wide clamping range.
attach easily.
All-new needle-nose profiles ensure a secure fit on smaller terminal connections. A wide 1.25in span and improved clamping force are designed to securely accommodate any terminal size.
ALL-NEW MICRO CLAMPS. IMPROVED CLAMPING FORCE.
Redesigned Clamps.
Engineered to provide increased terminal contact and higher conductivity.
Integrated Fuse. Strain Relief. Heavy Gauge Wire.
MADE TOUGH.
Integrated in-line fuse for added safety. Built-in over-molded strain reliefs. All-copper heavy gauge wire.
BUILT-IN M6 Eyelets.
HARD-MOUNT.
Leave GC001 hard-mounted to battery terminals using the built-in eyelet connectors and easily move NOCO Genius chargers between batteries.
EQUAL PROTECTION. 45% SMALLER.
PROTECTED.
Built-in 20A mini-blade fuse offers safety and protection. The all-new NOCO 20A fuse next is 45% smaller than the previous NOCO 10A fuse.
MADE FOR GENIUS CHARGERS.
PLUG N' PLAY.
GC001 battery clamps are compatible with a wide variety of NOCO Genius chargers as a replacement or to use with an additional vehicle.
GC001

Tech Specs
What's In The Box

NOCO GC001 X-Connect Battery Clamps
Hex Wrench (3mm)
Input

X-Connect Female

Output

Battery Clamps

Fuse

20 Amp Mini Blade

Wire Size

16 AWG

Overall Length

24in (61cm)

Cable Length

18.5in (47cm)

Compatible With

G1100 (All Versions)
G3500 (All Versions)
G4 (All Versions)
G7200 (All Versions)
G750 (All Versions)
GENIUS1
GENIUS10
GENIUS2
GENIUS2x2
GENIUS2x4
GENIUS5
Not compatible with NOCO Boost UltraSafe Lithium Jump Starters.


Manufacturer Part No. (MPN): GC001
Barcode: 1210000610546

Price Promise

We guarantee competitive pricing across our full range of new and used bikes.

Certified Dealer

Officially authorised and trusted to supply and support leading motorcycle brands.

Extended Warranty

Added peace of mind with comprehensive warranty options available.

4.8 Google Rating

Highly rated by our customers for service, expertise, and reliability.

You Might Also Like

Discover more products from our collection

Noco XL Battery Clamp Connector GC014

Noco XL Battery Clamp Connector GC014

X-Connect Battery Clamps with M10 Eyelets allows a battery charger to connect quickly to any battery. Replace a lost connector or add a set to a convenient location for easy charging. Remove the eyelets from the clamps to mount the connectors to theThe GC014 battery clamps are compatible with the X-Connect on Genius Chargers. Attach to the battery with the micro clamps for temporary connections or permanently mount the eyelets to the battery to quickly plug in your Genius battery charger for daily charging and battery maintenanceManufacturer Part No. (MPN): GC014

Battery ChargersNOCO
£22.96

In stock

Noco GC008 XL Eyelet Terminal Connector

Noco GC008 XL Eyelet Terminal Connector

Noco GC008 XL Eyelet Terminal ConnectorX-CONNECT M10 EYELET CONNECTOR.X-Connect XL Eyelet Terminal allows a battery charger to connect quickly to any battery. Replace a lost connector or permanently mount one on your car, boat, truck, or any other vehicle for easy charging. Permanently mount a battery connection to any battery with M10 (3/8-inch) hole size.XL Eyelets.Made For Genius.Improved Eyelet Design.Lie-Flat Design.The GC008's lie-flat eyelet design creates a better battery connection for higher conductivity. The low-set eyelet also reduces the risk of bending or damaging the eyelet or terminal post. New copper-plated eyelets improve conductivity, maximizing performance from the battery charger.Built-In M10 Eyelets.Hard Mount.Leave GC008 hard-mounted to battery terminals. Easily plug and unplug a Genius charger to move it between batteries.Equal Protection. 45% Smaller.20A Mini Blade Fuse.The GC008 is now equipped with a new and improved built-in fuse for increased safety that offers increased protection at 20 Amps. It is 45% smaller than the previous fuse, which was rated at 10 Amps.Genius Chargers + Accessories.Plug ˜N ™ Play.The GC004 is compatible with multiple Genius chargers and all X-Connect accessories.Compatible with Genius Chargers: GENIUS1GENIUS2GENIUS5GENIUS10GENIUS2X2GENIUS2X4Compatible with Previous G Series: G750G1100G3500G7500G4What's In The BoxPOS / NEG M10 10mm Eyelets to X-Connect CableInputX-Connect FemaleOutputM10 (3/8-Inch) Eyelet TerminalsFuse20 Amp Mini Blade ATCWire Size16 AWGOverall Length22.5in (57.2cm)Cable Length21in (53.3cm)Compatible WithG1100 (All Versions)G3500 (All Versions)G4 (All Versions)G7200 (All Versions)G750 (All Versions)GENIUS1GENIUS10GENIUS2GENIUS2x2GENIUS2x4GENIUS5Not compatible with NOCO Boost UltraSafe Lithium Jump Starters.Manufacturer Part No. (MPN): GC008Barcode: 1210000610706

Battery ChargersNOCO
£15.96

In stock

Noco GPA004 Pro Battery Clamps with Eyelets

Noco GPA004 Pro Battery Clamps with Eyelets

Noco GPA004 Pro Battery Clamps with EyeletsPro Battery Clamps w/ EyeletsThe GPA004 PRO Battery Clamps attach directly to the GENIUSPRO50 output, or to the compatible GPA003 10 ™ extension cable. Redesigned PRO clamps with integrated eyelets allow for a secure connection for all types of automotive, marine, and deep-cycle batteries.WARNING: California ™s Proposition 65.Absolute Performance.ENGINEERED FOR PROS.Designed for pros who need absolute performance and uncompromising functionality. Featuring 5-Gauge ultra-flexible silicone cabling - down to -40ºC - with protective nylon braided shielding for maximum protection against abrasion. and a heavy duty replaceable fuse - 60 Amp ANL Fuse - for maximum safety and performance.Improved Clamping Range & Force.REDESIGNED CLAMPS.Genius clamps are built with needle-nose profiles for smaller terminal applications and detachable integrated eyelets for permanent mounting the accessory to battery. Designed to fit battery terminals of any shape and size. Engineered for improved clamping range, clamping force, and higher conductivity.Integrated Eyelet.Directly attach M10 eyelet (10mm Dia.) to clamp and to battery terminal.What's In The BoxNOCO GPA004 PRO Battery Clamps With EyeletsInputGENIUSPRO50 PRO Female ConnectorOutputGENIUSPRO50 PRO Battery ClampsWire Size5 AWGLength5.4ft (1.65m)Weight2.65lb (1.2kg)Warranty1-Year LimitedCompatible WithGENIUSPRO50GPA003Manufacturer Part No. (MPN): GPA004Barcode: 1210000620132

Battery ChargersNOCO
£139.96

In stock

Noco HD Battery Clamps with Eyelets GPA002

Noco HD Battery Clamps with Eyelets GPA002

The GPA002 HD Battery Clamps attach directly to the GENIUSPRO25 output, or to the compatible GPA001 10' extension cable. Redesigned HD clamps with integrated eyelets allow for a secure connection for all types of automotive, marine, and deep-cycle baDesigned for pros who need absolute performance and uncompromising functionality. Featuring 8-Gauge ultra-flexible silicone cabling - down to -40ºC - with protective nylon braided shielding for maximum protection against abrasion. and a heavy duty replaceable fuse - 35 Amp ANL Fuse - for maximum safety and performanceManufacturer Part No. (MPN): GPA002

Battery ChargersNOCO
£99.96

In stock

What Our Customers Say

4.8 rating from our customers

About John Lee Motorcycles

John started work in the Motorcycle Trade in 1955, working for 2 large London Dealers for 10 years. His ambition was to own his own dealership, so moved to Northamptonshire and purchased the shop where we are today in Higham Ferrers, that was 1964.

Join the Club

Sign up for exclusive offers and discounts on the latest Motocross, Enduro and Electric bikes.

John Lee and Sons Motorcycles 2026. All rights reserved.
Powered By Fastrak